August 2014

The construction and maintenance of new infrastructure is not always the best way of confronting congestion. In many cases, it is much less expensive to design policies that shift traffic to underutilized infrastructure. The Getting the Goods without the Bads: Freight Transportation Demand Management Strategies to Reduce Urban Impacts (CFIRE 07-02) project, led by CFIRE affiliate researcher Joel Rogers, analyzed a variety of techniques for re-allocating freight and maximizing the use of existing infrastructure while also reducing the social costs of transportation. These techniques are known as freight transportation demand management (TDM) strategies.

This project consisted of in-depth analyses of a variety of TDM strategies, focusing on how each satisfies different goals, including reduced emissions, congestion reduction, reduced fuel consumption, and increased freight accessibility. These strategies fit into eight categories:

  • Anti-idling policies
  • Designated truck routes
  • Modal shift
  • Changing delivery hours
  • Intelligent Transportation Systems (ITS)
  • Land-use planning
  • Parking policies
  • Planning information coordination

Most of the freight TDM strategies analyzed in this project were found to be generally beneficial to communities wishing to confront transportation issues without resorting to additional construction. In general, planning information strategies and parking policies have the potential to provide significant benefits at a very low cost, and are among the least likely to incite community opposition.


General effectiveness of various TDM strategies: note that success is dependent on the unique circumstances of each city

The high costs and likelihood of unanticipated consequences of two of these strategies, however, make them unlikely to provide net benefits to their communities. Promoting modal shift from truck to rail is difficult for the public sector, given the many factors in private sector logistics decisions, and, if effective, is likely to upset residents living near rail facilities. In addition, additional freight rail traffic often leads to more trucks on the road. Similarly, restricting truck traffic during nighttime hours, while it can reduce some nighttime noise, is likely to exacerbate regional peak period congestion.

To learn more about this project and to read the final report, visit the CFIRE 07-02 project page.

Proper pavement texture is crucial to prevent road accidents, especially in wet conditions, but there are currently no minimum friction requirements in US road design. This is due mostly to the cost and difficulty of direct friction measurement that would be needed to confirm such requirements. This project proposes that friction, as well as noise emissions and energy usage, can be ascertained cheaply and non-destructively through lab testing of the asphalt mix.

The Characterizing Rider Safety in Terms of Asphalt Pavement Surface Texture (CFIRE 07-08) project, led by CFIRE affiliate researcher Hussain Bahia, aims to evaluate how asphalt mixes affect friction test results in the lab, and how well these predictions translate to the field. If these relationships are reliable, then specifications can be issued to improve rider safety while designing asphalt mixes.

In the field, friction is measured by a simple friction number (FN), assessed through a locked-wheel test. In the lab, the surface of an asphalt sample was measured by its mean depth profile (MDP), which is assessed by a surface laser-profilometer (SLP). Although cumbersome in the field, the use of an SLP in the lab would make asphalt analysis much simpler, and relating the asphalt’s MDP to its FN would give meaningful data to the designers who wish to achieve a minimum FN.

In addition, this project developed a model for predicting lab results, including MDP, from asphalt design parameters. The model used data from the Wisconsin Highway Research Program (WHRP) and the Minnesota Department of Transportation pavement test track facility. One of the most significant factors was found to be the variation in aggregate size used in the asphalt.

In this project, it was found that there was a high level of correlation between MDP and FN, which meant that friction performance of asphalt could be estimated from lab results. In addition, a model developed from asphalt mix results showed that the lab results were correlated to mix parameters such as the gradation of asphalt materials. Combining these two results gives a method for estimating road friction from mix design, which can be used to enhance highway safety.

To learn more about this project and to read the final report, visit the CFIRE 07-08 project page.


Satellite Sensors Improve NO2 Detection

August 26, 2014

Advances in satellite technologies have led to improved estimates of air pollution emissions. In the United States, ground-level instruments are expensive, and typically limited to urban areas. However, air emissions from truck and rail are significant in rural areas, away from existing monitors. Satellite-mounted instruments have been used to measure changes in emissions, from expanding […]

Read the full article →

Wisconsin Ports Week

August 26, 2014

Wisconsin Governor Scott Walker has declared August 18-24 as “Ports Week.” For more information, consult the press release and the proclamation.

Read the full article →

New Coatings Resist Corrosion in Pre-Stressed Concrete

August 25, 2014

Many construction projects use “pre-stressing” in their concrete sections, where steel strands are placed in tension before allowing concrete to set around them. When the tension is removed, the steel strands retain their strained shape and the concrete gains considerable compressive strength. Concrete cracks, however, expose the strands to corrosive compounds like salt and the […]

Read the full article →

Environmental Analysis of the Pickens Plan and Alternatives

August 22, 2014

In light of the considerable amount of oil imported into the United States, entrepreneur T. Boone Pickens has proposed an energy re-allocation plan to reduce dependence on foreign oil. The Pickens Plan includes the use of compressed natural gas as a fuel for heavy-duty vehicles, as well as bolstering the electrical grid with wind turbines. The […]

Read the full article →

Program & Policy Supervisor (Research and Library Services Unit)

August 20, 2014

Wisconsin Department of Transportation Madison, Wisconsin The Wisconsin Department of Transportation is seeking a Program & Policy Supervisor for the Research and Library Services Unit. This position has the following job duties. Provide direct supervision of WisDOT’s Research and Library Services Unit staff and advises the Performance, Policy and Research Section Chief on strategic research investment […]

Read the full article →